The Promarker aerosol spot marker is a premium quality non-fluorescent aerosol site marker for universal marking. Available in a variety of colours, Promarker is ideal for all spot marking and marking-out purposes and has a safety cap with a clog-free nozzle, which makes it ideal for use by surveyors and office-based staff. Both sizes can be applied using a variety of spray applicators.
Environmentally-friendly formulation
Wide range of colours, ideal for utility markings
Ease of use due to the non-block formulation
Both sizes have a safety cap that protects the user and prevent accidental discharge
Slow breakdown by UV, allowing clear marking out without expensive post-install removal costs
Suitable for line marking and facility contractors when marking out
Use this anti-slip tape to reduce risk of slips in multiple areas around the workplace.
Manufactured from a fine grade aluminium oxide, which makes it suitable for use in a wide range of applications. The grit is a medium anti slip abrasive coating. Our standard safety-grip is great for general anti slip requirements possessing excellent levels of grip (measured as Coefficient of Friction), the safety-grip is water resistant (if applied onto a non-porous surface, we do also offer a complete range of ancillaries) and is easily survives outside or inside
Dimensions: 50mm x 18m
Colours available: Grey, Yellow and Yellow/Grey
Alternative options: 25mm x 18m (FC1801), 100mm x 18m (FC1804) and 150mm x 18m (FC1805)
Black Protector with warning stripes - Warning Hazard Type 1 x 3 mtrs
Prevent accidents caused by loose leads and cables with our cost effective cable management range
Essentially halogen free
Fire retardant to BS476 Part 7 Class 3 and European equivalent DIN 4102 Part 1 and Class B1
Low smoke, non toxic and low fume emission levels in the event of fire
Tested for non conductivity to BS903-C5, 500V
Snap Fit profiles for indoor, floor laid applications
Simply “snap” open the membrane in the base, insert the cables and lay the protector on the floor.
Crysclear profiles
Manufactured from an opaque material designed to blend into any floor covering. Ideal for covering and protecting LED strips.
Split the base with round ended scissors for easy application.